1. VEVOR
#ad
VEVOR Concession Hood Exhaust, Grease Groove, 4-Foot X 30-Inch Stainless Steel Concession Hood Vent, Fume Pipe, Commercial Hood Vent Includes Baffle Hood Filter, 4FT Long Food Truck Hood Exhaust
#ad
Easy to assemble- simple structure, easy to put together with the help of the instructions. Constructed from high-quality 430 stainless steel material, able to resist cooking surface temperatures up to 572 °F.
More information #ad
This commercial exhaust hood system is specially designed for motor homes, and food truck applications, etc. The commercial hood system with high-temperature resistance, also not easy to get deformed. Wide application- a crucial equipment for your kitchen, concession trailers, able to remove large amounts of smoke and cooking odors with ease from the air. Two sturdy ring-pulls mounted on the top of the food truck vent, support suspension installation. Convenient design- our commercial hood system is equipped with a long grease groove, made to receive the grease. Large baffle hood filters- large area oil baffle plate, featuring good filtering and adsorption effect.
| Brand | VEVOR #ad |
| Manufacturer | VEVOR #ad |
| Height | 20 Inches |
| Length | 4 Inches |
| Weight | 13 Pounds |
| Width | 30 Inches |
| Part Number | Exhaust Hood 4FT |
More information #ad
2. VENTILATION DIRECT
#ad
Includes Stainless Steel Exhaust Only Hood, Rooftop Exhaust Fan, and Roof Curb 6' Wall Exhaust Only Hood & Fan, Stainless Steel Commercial Exhaust Only Hood System
#ad
Includes grease box and hinge kit. 600 degree hood rating - allows use with medium to heavy duty cooking equipment providing ultimate flexibility.
More information #ad
Vented roof Curb 19. 5” square x 22” high. Exhaust Motor: 0500 hp, 60hz, 1 phase 115 v, odp open Drip Proof. Hood specifications- 430 stainless steel construction where exposed, 48" depth provides better capture and containment of cooking vapors at lower airflow volumes. Etl & nsf stainless steel hood system, includes stainless steel exhaust only hood, rooftop direct drive exhaust fan, and flat roof curb. High temp Light Fixtures. Exhaust fan handles 1350 CFM @ -0750" wc esp, fan runs at 1403 RPM. Technical support available upon purchase. Manufactured in the usa.
| Brand | VENTILATION DIRECT #ad |
| Manufacturer | VENTILATION DIRECT #ad |
| Weight | 325 Pounds |
| Part Number | hood, fan, |
More information #ad
3. VENTILATION DIRECT
#ad
Rooftop Exhaust Fan, Fan, and Roof Curbs 10' Wall Canopy Hood, Untempered Supply Fan, Includes Stainless Steel Exhaust Hood, Supply Fan System, Stainless Steel Commercial Hood System
#ad
One year warranty. Fire suppression system not included. As all hoods are custom built, no returns or exchanges are accepted. Etl & nsf stainless steel hood system, rooftop direct drive exhaust fan, includes stainless steel exhaust hood with front perforated supply plenum, untempered supply fan, and flat roof curbs.
More information #ad
Supply motor: 0500 hp, odp open drip proof. Includes 2" mv ez Kleen Metal Mesh Filters. Stainless steel baffle Hood Filters with Handles and Bottom Hanging Hook. Factory installed 16" round exhaust riser, and factory installed supply risers with volume dampers. Exhaust Motor: 0750 hp, 1 phase 115 v, 13. 0 fla, odp open Drip Proof. Exhaust fan specifications- high speed direct drive centrifugal upblast exhaust fan with speed control single phase only, disconnect switch and 15-3/4" wheel. Vented roof curb 23” square x 20” high.
| Brand | VENTILATION DIRECT #ad |
| Manufacturer | VENTILATION DIRECT #ad |
| Weight | 425 Pounds |
| Part Number | Hood and Fan System |
More information #ad
4. VENTILATION DIRECT
#ad
Food Truck Concession Trailer Hood System with Exhaust Fan 4' Hood System with Exhaust Fan
#ad
Includes mounting bracket. Hardware kit and Duct Transition available for purchase separately. The hood measures 30” deep 24” high in the rear and has a 6” front face.
More information #ad
Exhaust fan handles 600 CFM @ -0300" wc esp, 60hz, 1 phase 115 v, fan runs at 1316 RPM. One year warranty. Stainless steel baffle Hood Filters with Handles and Bottom Hanging Hook. As all hoods are custom built, no returns or exchanges are accepted. Includes a high powered UL762 grease rated exhaust with with a low profile design. Exhaust Motor: 0180 hp, 1. 9 fla, odp open Drip Proof. Hood and exhaust fan package is the perfect choice for food truck and concession Trailer applications. 1/2 pint Grease Cup.
| Brand | VENTILATION DIRECT #ad |
| Manufacturer | VENTILATION DIRECT #ad |
| Weight | 166 Pounds |
| Part Number | food truck hood & fan |
More information #ad
5. SUN AIR
#ad
Commercial Kitchen Restaurant Duty Exhaust Hood, Wall Canopy Stainless Steel Exhaust Hood with Baffle Hood Filters, and 10” Round Exhaust Riser 4' Long Hood, High Temperature Light Fixtures
#ad
Manufactured in the usa. Includes stainless steel grease baffle filters with handles, and a grease cup. As all hoods are custom built, no returns or exchanges are accepted. Complies with UL7104ft 0" long x 48” deep x 24” high stainless steel exhaust-only wall canopy Hood with Built-in 3" Back Standoff and a Factory Installed 10” Round Exhaust Riser.
More information #ad
Designed for customers who care about quality, aesthetics, pre-wired high temperature light fixtures, and affordability. Constructed of 430 stainless steel where exposed. Listed and built in accordance with NFPA 96,. Technical support available upon purchase. One year warranty. Exhaust fan and fire suppression system not included. Etl listed to US and Canadian safety standards.
| Brand | SUN AIR #ad |
| Manufacturer | SUN AIR #ad |
| Weight | 210 Pounds |
| Part Number | 4824 Hood |
More information #ad
6. VBENLEM
#ad
For Grease Rated Commercial Kitchen Exhaust Hoods, 24.5W x 15.5H Inch, Pack of 6, VBENLEM Hood Filters, 5 Grooves Commercial Hood Filters, Commercial Kitchen Range Hood Filter, 430 Stainless Steel
#ad
Thus, it can help make the attached oil beads flow down to the bottom due to gravity（the hood in the picture not included. Efficient performance- these high-quality stainless steel baffles with 5 collection troughs, will cause the air to change direction and collect to form grease, and then enter the drain.
More information #ad
Provide 100% flame shield for preventing extreme fires from entering the exhaust hood, roofing pipes, etc. Convenient installation- a handle is equipped on each side of the filter for easy installation and replacement of the grease filter. Hassle-free usage- grease holes are evenly distributed on both sides. Handles vertical- our baffle grease filter needs to be mounted vertically with handles on the left and right sides. Advanced quality- made of 430 stainless steel. Easy to clean and environmentally friendly with low maintenance cost. The grease does not get stuck easily, and the holes are not easily plugged.
| Brand | VBENLEM #ad |
| Manufacturer | VBENLEM #ad |
| Part Number | VBENLEM |
More information #ad
7. HOODMART
#ad
4-Foot X 30-Inch, HOODMART Concession/Food Truck Trailer Hood System
#ad
Also available with factory built fire Suppression. Search “hoodmart concession Fire Suppression” in above search bar for complete listing. Constructed from heavy-duty 18-guage 430 stainless steel, pre-wired lights, stainless steel filters, All joints are welded liquid tight without seams by an automatic MIG welder, System includes: hanging brackets, and stainless grease cups.4
More information #ad
4-foot by 30-inch concession food truck hood system, 4-inch front and 18-inch back - Concession/food truck hoods come with smooth top allowing for maximum clearance when mounting in your trailer.| Brand | HOODMART #ad |
| Manufacturer | Naks, Inc. -- Dropship #ad |
| Height | 51.25 Inches |
| Length | 28.25 Inches |
| Weight | 181 Pounds |
| Width | 34.25 Inches |
| Part Number | EXSS004C |
| Model | EXSS004C |
| Warranty | 2-Year Hood/1-Year Fan Warranty |
More information #ad
8. CAPTIVE-AIRE
#ad
Grease Box for Restaurant Canopy Hood Exhaust Fan Includes Down Spout
#ad
More information #ad
| Brand | CAPTIVE-AIRE #ad |
| Manufacturer | Captive Aire Systems #ad |
| Weight | 2 Pounds |
| Part Number | GC-CUF |
More information #ad
9. Broan-NuTone
#ad
30-Inch Downdraft, Broan-NuTone 283003 Eclipse Telescopic Range Hood with Stainless Steel Cover
#ad
More information #ad
Stainless steel downdraft range hood: compatible with Broan 332H HVI certified 900 CFM exterior blowers and most in-line blower models required, not included. One year limited : Downdraft hood is backed by a one year limited.| Brand | Broan-NuTone #ad |
| Manufacturer | Broan-NuTone #ad |
| Height | 21.63 Inches |
| Length | 3.75 Inches |
| Weight | 37.38 Pounds |
| Width | 30 Inches |
| Part Number | 283003 |
| Model | 283003 |
| Warranty | 1 Year |
More information #ad
10. VBENLEM
#ad
VBENLEM Hood Filters, 430 Stainless Steel, Pack of 6, 19.5W x 19.5H Inch, 4 Grooves Commercial Hood Filters, Commercial Kitchen Range Hood Filter, for Grease Rated Commercial Kitchen Exhaust Hoods
#ad
Water, rust and deformation proof. Handles vertical- our baffle grease filter needs to be mounted vertically with handles on the left and right sides.
More information #ad
The grease does not get stuck easily, this stainless steel grease filter holds up to daily flame cooking, and the holes are not easily plugged. Size: 19. 5w x 19. 5h inch please confirm the product size before purchase. Thus, it can help make the attached oil beads flow down to the bottom due to gravity（the hood in the picture not included. 94% average grease removal efficency tested at 300 FPM, grilling, and frying. Provide 100% flame shield for preventing extreme fires from entering the exhaust hood, roofing pipes, etc. Advanced quality- made of 430 stainless steel. Hassle-free usage- grease holes are evenly distributed on both sides.
| Brand | VBENLEM #ad |
| Manufacturer | VBENLEM #ad |
| Part Number | VBENLEM |
More information #ad