As an Amazon Associate I earn from qualifying purchases.
ZIGGURAT PRODUCTS #ad - You don’t need to go searching for the right sized clamp anymore--we’ve got you covered! Effortless and durable: our sturdy elbow connector makes set up simple and a one-time project. No more fiddling around with rigid metal dryer clamps! Saves you money: our silicon seal ring gives you an airtight dryer connection, making your dryer more efficient while using less energy.
This means your clothes get dryer faster and you save money on your power bill! Avoid the headache: the stv-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow.
Simply slide it on and push your dryer back. Your stv-90 is sure to last longer than any other duct clamp out there! Does the trick: the snap-to-vent simple design gives you the power to hook up your dryer in just a matter of a few minutes. Works with your hose: we’ve updated our design to fit any 4” vent ducting, whether beveled or straight.
Vent Systems #ad - The dryer duct connector is seamlessly connected to achieve a good leakproof effect. Finally, install the clamp and tighten the screw. The duct connector is a three-hole - 3 way connector with two branches.
At the same time, it can discharge air from each part in the ventilation project. Don't worry about leaking air after installation. Made out of high quallity Metal it is a material with high strength, good toughness.
ZIGGURAT PRODUCTS #ad - We rely on quality to sell our products. Just pre-assemble the 90 elbow, 4" hose, and straight piece. With strong, yet flexible materials we have found the perfect way to create a clothes dryer connector that will get the job done for many years to come. This kit is 8 x 4 x 5 inches and gives a strong connection without creating a bulky mess behind your clothes dryer.
Tight attachment– this plastic dryer hose kit is made with soft rubber that will snugly attach to the hose you’re your dryer. Our safe alternatives to dryer duct connectors were designed to improve household safety.
Quick and easy installation – the use of this dryer hose vent snap on kit is so easy and it requires no tools. All of our products are made in the USA with top-quality materials. It can be put together within minutes with just your own two hands. Our dryer connectors resolve the risk of potential fires, help create a better operating dryer, and don’t need to be attached by a clamp. We create household accessories that make life easier for our valued customers.
Deflecto #ad - Fire-resistant Aluminum. 4 inch dia x 2-feet Length. 4 inch dia x 2-feet Length. Flexible Aluminum Duct. 4 in. Fire-resistant Aluminum. Flexible Aluminum Duct.
Kraftex #ad - This is a premium quality material known to be tough & resistant to extreme temperatures too. We truly believe our 4 inch duct connector is the best in the marketplace and we stand by that. Our dryer duct to wall connector will last you a lifetime.
Wide application – our duct flange to wall Dryer Vent is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan & many other indoor/outdoor ventilation systems. Quick installation – our 4in duct collar has pre-bored mounting holes for a quick & easy installation.
Secure fit – through using our plastic flanges, resulting in lower energy costs. Tough & durable – our 4in flange connector has been made from ABS Plastic. Premium quality – here is our new white 4 inch duct plastic connector Flange for heating & cooling ventilation systems. Screws are not included. Mount our 4in wall vent to any surface with 4 x M3/M3. 5 screws, then slide duct hose over dryer vent wall connector to clamp in place.
ZIGGURAT PRODUCTS #ad - Air tight and easy access: using our seal ring, you can make an air-tight seal for your ductwork with easy--but without the pain of metal clamps and tools. Our aim is to make things simpler, and with our system, you'll wonder why you ever spent hours messing with dryer vents.
Safe and effective, our Wall Plate Adapter is sure to last you as long as you need it to. Built to last: ziggurat products are built with premium materials and designed to outlast anything you can throw at them.
Covers a large area: even if the wall duct for your dryer is large, our adapter is 7" by 7", so you can be sure you're covered. Simplify your dryer connection: our frustration with metal clamps and bad seals is what led us to create our products. Pair our wall plate adapter with our STV-90 or our STV-M for the simplest and most effective dryer connection ever.
Vent Systems #ad - It is suitable for hoses of 100 mm 4 inch. Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. It is small in size, so it doesn't take up space. Don't worry about leaking air after installation.
The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part in the ventilation project.
It is free of heavy metals, safe and non-toxic. Finally, install the clamp and tighten the screw. The dryer duct connector is seamlessly connected to achieve a good leakproof effect. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.
1. Deflecto
#adSilver, Aluminum with Bead and Crimp, 3” long DAC4C, Deflecto 4” Duct Connector
#adDeflecto #ad - Crimped ends allow for easy installation, simply slide the ducts over each end and fasten into place. For joining together round ducting, our 4” one piece aluminum duct connector is an ideal solution.More information #ad
Maximum working pressure of 80 psi; maximum velocity of 5, 000 FPM; Operating temperature range of -100 to 430 degrees F. Constructed of fire resistant aluminum. Designed with a bead in the middle to give extra strength to your connection, which helps prolong use.| Brand | Deflecto #ad |
| Manufacturer | Deflect-o Products #ad |
| Height | 4 Inches |
| Length | 3 Inches |
| Weight | 0 Pounds |
| Width | 4 Inches |
| Part Number | VENDAC4 |
| Model | DAC4C |
| Warranty | AS LISTED |
More information #ad
2. Lambro
#adLambro 244 Duct Connector
#adLambro #ad - Connects 2 pieces Of 4 inch Flexible Aluminum Duct. Light weight aluminum material for increased flexibility. Easy to use. Highly durable. Portable and fits in most storage spaces. Manufactured in United states.More information #ad
| Brand | Lambro #ad |
| Manufacturer | Lambro #ad |
| Height | 4 Inches |
| Length | 4 Inches |
| Weight | 0.04 Pounds |
| Width | 3 Inches |
| Part Number | 244 |
| Model | 244 |
More information #ad
3. ZIGGURAT PRODUCTS
#adZiggurat Dryer Duct Connector | STV-90 Version 2 | Laundry Dryer Snap to Vent 90 Degree Elbow
#adThis means your clothes get dryer faster and you save money on your power bill! Avoid the headache: the stv-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow.
More information #ad
Simply slide it on and push your dryer back. Your stv-90 is sure to last longer than any other duct clamp out there! Does the trick: the snap-to-vent simple design gives you the power to hook up your dryer in just a matter of a few minutes. Works with your hose: we’ve updated our design to fit any 4” vent ducting, whether beveled or straight.
| Brand | ZIGGURAT PRODUCTS #ad |
| Manufacturer | Design-Tek #ad |
| Height | 5.5 Inches |
| Length | 6.25 Inches |
| Weight | 0.5 Pounds |
| Width | 4.5 Inches |
| Part Number | STV-90 |
| Model | STV-90 |
More information #ad
4. Vent Systems
#ad4 Inch 3 Way Fitting, Duct Hose Dryer Vent T Connector, Vent Systems 4'' Inch Duct Connector 3 Way Hose Adapter/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan
#adAt the same time, it can discharge air from each part in the ventilation project. Don't worry about leaking air after installation. Made out of high quallity Metal it is a material with high strength, good toughness.
More information #ad
The interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals. Wipe the tee when using it, then dock it with the hose and fix it with aluminum foil tape. It is suitable for hoses of 100 mm 4 inch. It is small in size, so it doesn't take up space.| Brand | Vent Systems #ad |
| Manufacturer | Vent Systems #ad |
More information #ad
5. ZIGGURAT PRODUCTS
#adSTV-M Dryer Duct Connector, DIY Easy Dryer Vent Hookup Kit, by Ziggurat Products
#adTight attachment– this plastic dryer hose kit is made with soft rubber that will snugly attach to the hose you’re your dryer. Our safe alternatives to dryer duct connectors were designed to improve household safety.
More information #ad
These products are the best choice for simplicity and durability. The better choice – this snap on dryer hose from ziggurat provides a top-quality product for anyone in need of dryer connections. The simplicity of this snap on hose kit is that it allows you to begin using the dryer right away. Quick and easy installation – the use of this dryer hose vent snap on kit is so easy and it requires no tools. All of our products are made in the USA with top-quality materials. It can be put together within minutes with just your own two hands. Our dryer connectors resolve the risk of potential fires, help create a better operating dryer, and don’t need to be attached by a clamp. We create household accessories that make life easier for our valued customers.
| Brand | ZIGGURAT PRODUCTS #ad |
| Manufacturer | ZIGGURAT #ad |
| Height | 5 Inches |
| Length | 8 Inches |
| Weight | 1 Pounds |
| Width | 4 Inches |
| Part Number | STV-M |
| Model | STV-M |
More information #ad
6. Deflecto
#adFlexible , Semi Ridgid, Deflecto Aluminum Duct with Connectors, Silver AM42, 4" x 2'
#adMore information #ad
Made with 30 gauge aluminum for strength. Ideal for connecting 2 ducts. Diameter fits compatible ducts. Flexible for easy installation. Features a maximum temperature rating of 284 degrees Fahrenheit.| Brand | Deflecto #ad |
| Manufacturer | Deflecto #ad |
| Height | 4 Inches |
| Length | 8.5 Inches |
| Weight | 0.15 Pounds |
| Width | 4 Inches |
| Part Number | VENAM42 |
| Model | AM42 |
| Warranty | As Labeled |
More information #ad
7. Kraftex
#adWhite Plastic Duct Connector Flange for Ventilation Straight Pipe, Cooling and Heating. Small Through The Wall Trim Collar Ducting with Mounting Plate Quick Connect, Dryer Vent Wall Plate 4 Inch
#adWide application – our duct flange to wall Dryer Vent is perfectly suited for ducting your tumble dryer, bathroom or kitchen extractor fan & many other indoor/outdoor ventilation systems. Quick installation – our 4in duct collar has pre-bored mounting holes for a quick & easy installation.
More information #ad
So, click “add to Cart” now and buy with confidence. If you do not feel connected to our duct wall connector, you can expect an air-tight seal to prevent any cold or hot air entering your home, we’ll FULLY REFUND YOU. Secure fit – through using our plastic flanges, resulting in lower energy costs. Tough & durable – our 4in flange connector has been made from ABS Plastic. Premium quality – here is our new white 4 inch duct plastic connector Flange for heating & cooling ventilation systems. Screws are not included. Mount our 4in wall vent to any surface with 4 x M3/M3. 5 screws, then slide duct hose over dryer vent wall connector to clamp in place.
| Brand | Kraftex #ad |
| Manufacturer | Kraftex #ad |
| Part Number | 15 |
More information #ad
8. ZIGGURAT PRODUCTS
#adSnap to Vent Wall Plate Adapter, Easy Connect Dryer Hose System by Ziggurat Products
#adSafe and effective, our Wall Plate Adapter is sure to last you as long as you need it to. Built to last: ziggurat products are built with premium materials and designed to outlast anything you can throw at them.
More information #ad
With the ziggurat wall plate Adapter, you can ensure that the seal between your hose and wall duct is secure and air tight. Just press it on to install and pop it off for annual cleanings. Pair with our other products: our products not only work for any home, they also work seamlessly together. Covers a large area: even if the wall duct for your dryer is large, our adapter is 7" by 7", so you can be sure you're covered. Simplify your dryer connection: our frustration with metal clamps and bad seals is what led us to create our products. Pair our wall plate adapter with our STV-90 or our STV-M for the simplest and most effective dryer connection ever.
| Brand | ZIGGURAT PRODUCTS #ad |
| Part Number | STV-WPA |
More information #ad
9. Vent Systems
#adDuct Hose Dryer Vent T Connector, 4 Inch 3 Way Fitting, Vent Systems 4'' Inch Duct Connector 3 Way Hose Adapter ABS Plastic/Splitter for Hose T-Shape Round Pipe Connector- Extractor Fan
#adThe interior of the duct splitter is smooth, and its reasonable curvature greatly reduces the wind resistance. At the same time, it can discharge air from each part in the ventilation project.
More information #ad
The duct connector is a three-hole - 3 way connector with two branches. Made of high quality abs plastic, it is a material with high strength, with the features of environmentally friendly, good toughness and easy processing. It is free of heavy metals, safe and non-toxic. Finally, install the clamp and tighten the screw. The dryer duct connector is seamlessly connected to achieve a good leakproof effect. With the dryer vent hose it can be connected to exhaust fans, dryer vent covers and vent seals.
| Brand | Vent Systems #ad |
| Manufacturer | Vent Systems #ad |
More information #ad
10. AC Infinity
#ad4 x 4 x 4” Exhaust Pipe Splitter Y Connector, for Indoor Growing Tents Dryer Vent Hoses, AC Infinity 3-Way Duct Splitter
#adAC Infinity #ad - Smooth, rounded bending frees airflow to minimize wind resistance by reducing friction and turbulence. Y-shaped splitter maximizes the use of only one inline fan by branching your ductwork into two paths.More information #ad
A duct connector designed to help cool and ventilate multiple spaces by redistributing airflow. Fits 4” duct openings | raised lip for greater Grip | Length: 1090" | finish: Powder Coat. Solid steel body with a powder coat finish that can resist corrosion and withstand high temperatures.| Brand | AC Infinity #ad |
| Manufacturer | AC Infinity #ad |
More information #ad
